Pipe Threading Machine for water or gas pipe
- Spindle Support
- Hammer Chuck
- Efficient Cutter
- Automatic Die-Head
- Sharp Reamer
- Cutting Oil Pump
- Powerful Electric Motor
|A. Spindle Support
The spindle is supported by Sealed Ball Bearings ensuring correct alignment and continued accuracy through lack of wear.
|B. Hammer Chuck
The Jaw Body is wider giving greater load capacity and durability. The increased movement range of the Jaw Insert improves the centripetal clamping feature. The non-slip impact clamping Hammer Chuck provides a secure base for perfect threading, cutting & reaming.
|C. Efficient Cutter
The special design gives easy, quality cuts and durability.
|D. Automatic Die-Head
The recding self opening system ensures the standard degree of 1/16 taper thread and the smooth threading with low resisance of Dies.
|E. Sharp Reamer
The design and accurate machining of the special forged material give smooth reaming.
|F. Cutting Oil Pump
The high capacity Gear Pump operates at low revolutions for longer life.
|H. Powerful Electric Motor
Class F insulation grade on the motor allows continuous operation. More than sufficient Hosepower;
Beaver 50 - Input :1150W Output :750W,
Beaver 80 & 100 - Input :1700W Output :1140W
|J. Guide Bar
The smooth surface avoid wearing and Carriage can travel on them with less power
|G. Gear Box
The precision machining and closely controlled Heat Treatment give smooth power transmission and low wear.
|I. Stable Carriage
There is large contact surface area between Carriage and Guide Bars. Combined with close tolerance machining and high abrasion hardness, this ensures minimum wear and avoids a loose fit to give highest quality threads.
|K. Strong Frame
The casting of the frame in one piece ensuresaccurate location and support of the Guide Bars and Spindle.
|Threading Capacity||Pipe 1/4~4", Bolt 3/8~2" M10~42mm, Condult 19~75mm 1/2~3"|
|Motor||Universal Single Phase
Input 1700W Output 1140W 50/60Hz
*Voltage made to order
|Spindle Speed||48.18rpm(2 Speed)|
|Dimensions||790(L) x 540(W) x 480(H) mm|
(BSPT or NPT)
|Die-Head BE1/2 ~ 2" (Auto) AT2.1/2 ~ 4" (Auto)|
|Dies BE1/2 ~ 3/4" BE1 ~ 1.1/2"(2") AT2.1/2 ~ 4"|